Asphalt resurfacing & overlay is a service that can transform old, damaged pavement. The process involves applying a fresh layer of asphalt onto existing pavement, creating a brand-new surface that’s strong and aesthetically pleasing. While not necessary for all repair issues, asphalt resurfacing can add over a decade of life to your pavement. Plus, the asphalt resurfacing cost is more manageable than full-blown reconstruction.
Here’s what you need to know about the asphalt resurfacing & overlay process.
When is Asphalt Resurfacing & Overlay Appropriate?
Asphalt paving isn’t indestructible. It can experience many forms of damage, especially when dealing with the intense heat and sun in Austin Texas. Even with regular maintenance, there will come a point when asphalt resurfacing becomes a more practical option than frequent repairs.
The goal is to replace the upper damaged layer with fresh, less damage-prone asphalt paving. Many contractors recommend asphalt overlays whenever deep cracks, potholes and other repair issues become frequent. At that point, the asphalt resurfacing cost are more reasonable than constant asphalt repairs.
It’s important to note that resurfacing doesn’t fix everything. It won’t correct severe damage, crumbling or foundation issues. Consult a seasoned contractor to determine if asphalt resurfacing is right for your pavement.
Does Asphalt Resurfacing Require Contractors to Remove Old Pavement?
The beauty of resurfacing in Austin Texas is that it doesn’t require removing your pavement and starting from scratch. Instead, contractors will use the existing surface and foundation.
The goal is to replace the top layer with new asphalt. Therefore, contractors will begin the project with asphalt milling. Milling is a process that removes a precise amount of asphalt. Contractors use heavy-duty equipment and mill to appropriate depths based on your pavement’s needs.
Milling keeps features like curbs and utility holes at the proper elevation. However, it removes enough asphalt to create a new smooth surface. Best of all, the material removed during milling often goes to recycling plants for reuse!
Should Contractors Make Repairs Before Apply Asphalt Overlay?
The milling process usually takes care of most asphalt repair issues. However, they may not address deeper problems.
If problems persist, contractors must perform asphalt repairs before applying the overlay. Depending on the extent of the damage, that might involve removing and rebuilding sections of the pavement.
Repair work must happen before the asphalt overlay goes on. Otherwise, similar problems may occur on the resurfaced pavement.
How Do Contractors Ensure Maximum Longevity When Performing Asphalt Resurfacing & Overlay?
Resurfacing in Austin Texas can transform pavement, restoring its looks and durability. However, contractors must complete a few tasks to maximize longevity.
The first is to apply a primer. Contractors spread the primer on the existing milled asphalt. Once cured, it helps to strengthen the bond between the old and new asphalt.
Asphalt resurfacing uses standard hot asphalt mix, just like any new paving project. Contractors will use a similar formula and grade to create consistent results and give the finished asphalt paving a like-new appearance. As always, the resurfaced asphalt must cure before contractors can apply sealer and striping.
When your asphalt paving needs a facelift, contact RDC Paving. We’re a full-service paving and maintenance company with two decades of experience serving commercial and residential property owners in and around Austin Texas. We approach every project with a personal touch, ensuring we meet your needs and deliver results you can count on.
RDC Paving is ready to handle all your pavement needs. We do asphalt paving, repairs, sealcoating, concrete work, ADA-compliant feature installations, parking lot striping, maintenance and more.
Call the RDC Paving team at (512)920-9155 for more information and a free quote. You can also submit our online contact form or email ryan@rdcpaving.com.
