Austin Asphalt Paving Budget Tips

Austin Asphalt Paving Budget Tips

Austin Asphalt Paving Budget TipsAsphalt is the leading paving material in the nation, and there are several valid reasons for its popularity. Compared to concrete, asphalt is less expensive and faster to install and repair. Asphalt pavements have a luxurious dark color that most people find aesthetically pleasing. Furthermore, when they receive the proper care, asphalt pavements can have very long lives. However, Austin asphalt paving needs a little attention throughout its life for it to last and look as it should. Because asphalt services are not necessarily annual needs, budgeting for them can be challenging. Here are some tips on how to create a paving budget that will make the best use of available funds.

Are There Austin Asphalt Paving Services That I Need More Than Once Each Year?

Whenever possible, you should have your asphalt contractor provide the following services every spring and again in the fall.

1. Conduct a thorough inspection of the pavement to identify issues. Some issues may need immediate attention, but you may be able to postpone others. Identifying issues for future resolution gives you more time to reallocate or secure the funds.
2. Repair significant cracks. Austin paving contractors generally consider any crack that is more than half an inch wide or deep as significant. Open cracks lead to water penetration, and water penetration leads to foundation damage.
3. Clean up any oil, brake fluid, gas, or other fluids that vehicles have deposited on your asphalt paving. Virtually all vehicle fluids are petroleum-based products that will destroy the binder in your asphalt pavement.
4. Check grates and gutters to make sure that water can drain properly from your pavement. Drainage issues can allow water to penetrate around fixtures or at the pavement’s edge.

What Austin Asphalt Paving Services Do I Need Every Two Years?

After they install new paving in Austin Texas, most asphalt companies recommend sealcoating it before it is a year old. Going forward, you should apply fresh sealcoating every two years. Mare that your asphalt contractor cleans and repairs your pavement before sealcoating it. You also want to make sure that your contractor applies two thin coats of sealant for maximum protection. Painted pavement markings and lines also have a life of about two years.

What Austin Paving Services Might I Only Need Once Every Decade?

Old, unsightly asphalt pavements can often be saved by overlaying them. Your contractor may refer to this as asphalt resurfacing. In brief, resurfacing involves grinding away a couple of inches of the existing pavement before replacing it with new asphalt. Resurfacing makes your pavement look like a new one. However, the cost is much less than installing new paving on driveways or other pavements after demolishing an existing pavement.

Where Can I Find a Reputable Austin Paving Company to Assist Me?

RDC Paving is an experienced asphalt paving company serving residential, commercial, and industrial clients throughout Central Texas. Our services include asphalt paving and resurfacing, concrete parking lots, asphalt paving driveway, asphalt repairs, sealcoating, asphalt milling, parking lot striping, asphalt crack repair, parking lot maintenance, concrete driveways and concrete repairs. We have the expertise to successfully complete jobs of all sizes. For a free quote, submit the online request form. If you prefer, you can call us at 512-920-9155.

Contact Us

Fill out the form below, and a team member will contact you shortly.