Asphalt paving has long been praised for its versatility, longevity, and economy. Sooner or later, though, your asphalt pavement will need a repair or even a makeover. Asphalt’s versatility is once again demonstrated by the range of techniques and methods that can be used to restore a pavement. You are probably familiar with several repair or rejuvenation methods, but are you aware of a procedure known as asphalt milling?
What Is Asphalt Milling?
Asphalt milling in Austin is a procedure that contractors can use to grind away an asphalt pavement’s wearing course. Asphalt milling contractors use machines that have cutters affixed to a rotating drum. Austin asphalt milling machines are available in various sizes and configurations. Some milling machines are powerful enough to remove the full depth of an asphalt pavement, while others are small enough to reach areas that are hard to access. Typically, an Austin asphalt milling company will transport the grindings to a batch plant for recycling. However, the milled material can sometimes be recycled at the job site.
Why Do Contractors Use Asphalt Milling Techniques?
Contractors use asphalt milling in Austin for a variety of purposes, but one of the most common reasons is to prepare a pavement to accept an asphalt overlay. Asphalt overlaying is the removal and replacement of the wearing course to rejuvenate an existing pavement. Asphalt overlays are significantly less expensive than a pavement reconstruction, but the average person will not be able to distinguish between an asphalt reconstruction and an asphalt overlay in Austin. In addition, asphalt milling contractors may use milling machines to correct certain drainage issues, cut rumble strips into a pavement, or eliminate bumps or minor depressions in the pavement’s surface.
How Should Customers Prepare for an Asphalt Milling Project?
The best source of information regarding what you need to do to prepare for your project is the Austin asphalt milling company you hired to perform the work. Your Austin milling contractor will have become familiar with your pavement to create a list of the steps to be followed. Even if two projects seem identical, the steps will not always be the same. That said, the following list shows the typical preparation that customers should handle.
1. Identify your peak traffic hours. If you do not operate 24/7, you could ask your Austin milling contractor to perform your work while you are closed. Otherwise, work with your contractor to find the slowest times so that disruptions can be minimized.
2. If you are installing a parking lot asphalt overlay in Austin, you will need to find an alternative location for your visitors to use. Perhaps a neighboring business can help, or maybe your contractor can divide your asphalt overlaying project into stand-alone sections.
3. Timely, open communication between you and your contractor will be essential. However, it is also vital that you communicate with your employees, tenants, residents, or other visitors so that they are aware of your upcoming Austin milling project. People will need to know which entrances and exits to use, where to park, how to access your building, or how to navigate your complex.
RDC Paving provides asphalt and concrete services to customers in and around Austin. Our services include asphalt overlaying and paving, asphalt milling, asphalt repairs, asphalt sealcoating, asphalt driveway paving, asphalt crack repairs, and parking lot striping. We also construct concrete driveways, parking lots, curbs, ramps, sidewalks, and ADA features. Furthermore, we offer concrete repairs and comprehensive parking lot maintenance plans. We have an unparalleled reputation for exceptional craftsmanship and exemplary customer service. To request a free quote, call 512-920-9155, fill out our online form, or email Ryan@RDCPaving.com.
